Page 886 - Rollingbearings

11 Cylindrical roller thrust bearings

Loads

Minimum load q n w 2 Symbols
F am = 0,0005 C 0 + A ———
⎝ 1 000 ⎠ A minimum load factor (page 888)
C basic static load rating [kN] (page 888)
For additional O
a
information F axial load [kN]
F minimum axial load [kN]
am
† page 106
n rotational speed [r/min]
P equivalent dynamic bearing load [kN]
Equivalent P = F a P equivalent static bearing load [kN]
dynamic bearing O
load

For additional
information
† page 91

Equivalent static P = F a
0
bearing load

For additional
information
† page 105

Temperature Bearing washers and rollers Permissible speed
The bearings are heat stabilized up to at
limits least 120 °C (250 °F)
The speed ratings in the product table,
Cages page 888 indicate:
The permissible operating temperature for
cylindrical roller thrust bearings can be Brass cages can be used at the same oper- • the reference speed, which enables a
limited by: ating temperatures as the bearing washers quick assessment of the speed capabilities
and rollers For temperature limits of poly- from a thermal frame of reference
• the dimensional stability of the bearing mer cages, refer to Polymer cages, • the limiting speed, which is a mechanical
washers and rollers page 188 limit that should not be exceeded unless
11 • the cage the bearing design and the application are
• the lubricant Lubricants adapted for higher speeds

Where temperatures outside the permissible For temperature limits of SKF greases, refer For additional information, refer to Operating
range are expected, contact SKF to Selecting a suitable SKF grease, page 116 temperature and speed, page 130
When using lubricants not supplied by
SKF, temperature limits should be evaluated
according to the SKF trafic light concept,
page 117

884