Page 934 - Rollingbearings

14 Cam rollers
14

Cam roller features
More informatione information
Mor SKF cam rollers (yoke-type track rollers
based on ball bearings) are designed to run
on all types of tracks and to be used in cam • Accommodate high radial loads
17
Gener 63 drives, conveyor systems, etc The thick-walled outer ring enables high
Bearing life and load ratings al bearing knowledge . . . .
The outer ring running surface is crowned radial loads, while reducing distortion and
59
Design considerations earing selection process . . . . .
B 59 as standard Double row cam rollers are also bending stresses
L 109 available with a cylindrical (lat) outer ring
160
Bearing systems ubrication . . . . . . . . . . . . . . . . . .
13
B
Recommended its earing interfaces 1699 running surface • Accommodate tilting moments
Se 208 SKF supplies cam rollers greased, sealed Double row cam rollers accommodate
Abutment and illet dimensions aling, mounting and
dismounting 193 and ready-to-mount They are available in higher tilting moments than single row
Lubrication 239 two main designs and also as variants of cam rollers
these:
Mounting, dismounting and • Long service life
bearing care 271 • single row cam rollers based on deep The crowned outer ring running surface is
Mounting instructions for groove ball bearings in the 62 series beneicial for applications where outer ring
individual bearings † skf com/mount (ig. 1) tilting relative to the track may occur or
SKF bearing maintenance • double row cam rollers based on double where edge stresses need to be
handbook (ISBN 978-91-978966-4-1) row angular contact ball bearings in the 32 minimized.
dimension series (ig. 2)
• Relatively high speed capability

Fig. 1 Fig. 2
Single row cam roller Double row cam roller

932